| Revolutionary new bandstand system to ensure you and your workers operate a safe system of work when building walls up to 4.5 metres high. |
|
 |
| The old bandstand or trestle method of working will become obsolete as legislation under the Working at Heights directives impose severe restrictions on how to access any area above ground level. |
|
| This system is designed by bricklayers for bricklayers to ensure they can safely build any wall up to 4.5 metres with the materials loaded on the Safestand. |
|
| The 3.9 metre run unit is available exclusively from TP Hire located throughout our nationwide network of builders merchants. |
|
| To find your nearest hire centre visit our website at www.toolmart.co.uk. |
|
 |
Components |
|
|
|
| TP Safestand - Base Stand - Code 8601 |
| This base stand is the first component required, 4 of these should be placed approx. 900mm apart on a level surface. |
|
| TP Safestand - Upper Stand - Code 8602 |
| Place 4 of these in the top of the base stand ensuring the handrail post is to the outside of the working area. |
|
| TP Safestand - Handrail Post - Code 8603 |
| Place 4 handrail posts in the top of the upper stand which is next to the working area. |
|
| TP Safestand - Handrail - Code 8604 |
| Place handrails between the upper stands to form a lower and upper guardrail system all around the Safestand. |
|
| TP Safestand - Access bracket - Code 8605 |
| Place the access bracket on the outside of the stand where access to the stand is required. |
|
| TP Safestand - Anti-Flip Board - Code 8606 |
| The anti-flip board is used to stabilise each end of the boards so that when standing on them no movement occurs. |
|
| TP Safestand - Short Handrail |
| Where the Safestands are in restricted space, the short handrail allows the unit to be used with handrails in place. |
|
| TP Safestand Unit |
| When erected, the system will allow men and materials to be loaded onto the structure with excellent stability. |
|
| TP Scaffold Boards (3.9m) - Code 1455 |
| The Safestand unit will require 5 x 3.9m scaffold boards, placed on the upper stand. |
|
| TP Scaffold Board (3.0m) - Code 1454 |
| The Safestand will require 1 x 3.0m to place as a toeboard, this allowing for access at either one or other end. |
|
| TP Safestand Unit, Complete With Boards |
| The Safestand system complete costs £59.08 per 3.9m run. |
|
|
|
Special Offer |
|
|
|
| This new product launch has attracted much interest as it is the safest way to build walls. By using the internet, large savings can be made by emailing your enquiry to hire@travisperkins.co.uk. This automatically guarantees you a 30% saving if you hire more than one unit. |
|
| • | TP Safestand unit £43.00 p/w |
| • | Discount available on multiple units |
| • | Full range of hire equipment available |
|
|
| TP Hire operate nationally from over 150 hire centres throughout the UK. Our hire centres offer a full range of equipment from cement mixers to access lifts. Full details can be found at www.toolmart.co.uk, if you require further information, please contact hire@travisperkins.co.uk. |
|
| Alternatively, contact 0870 6078700 to be connected to your nearest TP Hire centre. |
|
|
The Safestand 7 Point Plan |
|
|
|
| 1. | Place the first four Safestand lower sections approx. 900mm apart ensuring they run parallel to each other. |
| 2. | Place the Safestand upper into the Safestand lower ensuring the fixed upright is on the outside of the working area. |
| 3. | Place the anti-flip board on the two outside Safestands. |
| 4. | Place five 13' scaffold boards flat running across all four Safestands and the anti-flip boards. Fit the toe board into place in the brackets provided on the Safestand upper's upright post. |
| 5. | Place the handrails in the slots found on the upright posts, including the returns. |
| 6. | Drop the ladder bracket support into the upright post that you require, and then securely fix the ladder to the ladder bracket support and where necessary foot the ladder. |
| 7. | Fit the brick guards as necessary, and cut away the entry point of the toe board. |
|
|
|
|
|
Safestand History |
|
|
|
| Liam Clear, owner of Pyramid Builders Ltd. developed the Safestand system after having great difficulty in finding a suitable safe way to build walls and have the materials at the same level. As an experienced bricklayer, Liam set about making his own platforms, listening to his bricklaying gangs and making sure all requirements were covered. The refined product took over 2 years to develop and now it is a patent approved "builders trestle" suitable for use in the UK meeting all current safety requirements plus the forthcoming "working at height" regulations. The system is available nationwide via TP Hire, a national hire company attached to Travis Perkins - one of the UK's leading builders merchants. |
|
| If you require further details regarding the TP Hire Safestand system, please contact hire@travisperkins.co.uk. |
First Steps
